Choose The Best Tile Floors For Your House

 

 

If you are looking to get the flooring done for your home, we are sure there must be no shortage of options to consider. Every room of your house will have its own personality and will need its own appearance and style. Thus, choosing a single theme for your entire house won’t be a wise decision. There are a lot of flooring options out there and having tile flooring is the best thing you can do for your house. Still, there is no shortage of colours, designs, textures and materials. You will be boggled by the range available once you go out to shop. Simply put, not every tile and its texture are suitable for your space. You have to be vigilant about choosing what suits your space requirements and theme. Let’s take you in a journey of choosing what’s best for your home! 

Tile Hardness 

Tie it with a knot around you. The tile hardness is the foremost thing to be considered. When you are browsing through different types of floor tiles, pay attention to the hardness as well. Depending on where it is going to be used, the tiles have to be strong enough to bear the foot traffic, and scratches etc. For example, if you are choosing stone tiles Sydney, you have to see which room will they be going to so you check the reliability. There is a specific scale that is used to measure the hardness, but that would be too technical for you. What we can recommend you is that you ask the retailer you are buying from regarding the scale measure and you can then choose them as per the description we are providing you here. If the tile is Class I, it means that it isn’t appropriate for foot traffic. In other terms, you can only use it on walls. The class II tiles are used for interior wall applications or light traffic areas like, washrooms. The Class III category is for counter tops, walls and is suitable for normal foot traffic. You can use it in areas like kitchens, entryways. Finally, Class IV is for moderate to heavy traffic, and can be used in entryways, halls and other areas of the home.  

Pay Attention To What You Are Getting 

Once you have decided the hardness as per your requirement, there is another critical thing that should not be missed. While the term might sound technical, you should extremely be aware of the porosity of the tiles. It is determined by the ratio of air holes to solids in a tile. This impact the water absorption, hence you have to be aware of what sort of tiles you are choosing for which area of the house. If you are using it for the moisture prone areas like laundry room and kitchen room, pay real close attention to what you are choosing. This rating is extremely important to be considered. Let us help you again. If the tiles you are choosing is impervious, it means their water absorption is 0.5 percent or less. As you might have already guessed, it is best for use in washrooms and kitchens where the water absorption can cause an issue. The second class is vitreous, which has the water absorption capacity of 0.5 to 3 percent. Next up is semi vitreous that has the water absorption of only 3 to 7 percent. Finally, there is non-vitreous type that can absorb water up to 7 percent. No brain and no rules applied here. The greater the water absorption quality, the lower the percentage of flooring use. Hence, use those for your walls and other embellishments around the house. If you choose the wrong one and get them installed, you are not only going to regret later, but will have to get everything redone. 

Slip Resistance 

Among other things, slip resistance is also important. If the tiles are slippery, they cannot be used in the frequent areas of your house. Ceramic or Porcelain have a special textured surface, hence inquire about them. Second, the slate has a natural slip resistance texture, so they are also beneficial for the mass tiling. The glass and mosaic small size tiles are slip-resistant, and they will be perfect as shower tiles. Choose these at the areas mentioned and you will be good to go!  

Leave a Reply

Your email address will not be published. Required fields are marked *